3D MODELING BY ENGINEERING 2 PRODUCTION, INC.E2P's basic service converts your as-built and existing drawings or scanned document into electronic 3D CAD files. The documents are 100% manually drafted into Solidworks by our Certified Solidworks Professionals to match the original sheets exactly. All models are drafted as full-scale 1:1 to nominal values, 100% dimensionally accurate, and parametric.
Are your sheets larger than 22" X 34" for basic components? Your source document can be 8-1/2" X 11" to unlimited sheet size. For sheet sizes larger than D-Size (22" x 34"), the cost per sheet is proportionally increased. For example, if your source document measures 30" X 42", the unit cost per sheet would be calculated as follows: D-Size Base Price ($245) X Oversize Percentage (68%) = Adjusted Cost ($411 per sheet) Do you have valve or multi-port bodies with complex geometry? Sheet size can be of any size and length. Complex geometry is $22 per feature generation.   Final cost will be as reported by Solidworks from the Feature Statistics tool. For example, if the model generated has 10 features, the cost per model would be calculated as follows: Features Generated (10) X Base Price ($22) = Total Cost ($220) |